System Edit Mode:
Use this mode to edit global System Parameters.
To edit the System Parameters, use the < CURSOR > buttons to select the parameter you wish to edit. Then, use the - VALUE + buttons to change the parameter's value.
System parameters (p. 89)
| Parameter | Description | Value Range |
|---|---|---|
| GENERAL Group | ||
| LCD Contrast | 1 to 10 | |
| Master Tune | 415.3 to 466.2 | |
| Master Key Sft | Master Key Shift | -24 to +24 |
| Master Level | 0 to 127 | |
| Hold Pedal | Hold Pedal Polarity | STANDARD, REVERSE |
| Local Control | Local Controller | OFF, ON |
| Clock Source | INT, MIDI | |
| CONTROLLER Group | ||
| Mod | Modulation Assign | MODULATION, PORTA TIME, VOLUME, BALANCE, PAN, EXPRESSION, PORTAMENTO, SOSTENUTO, SOFT, RESONANCE, RELEASE TIME, ATTACK TIME, CUTOFF, DECAY TIME, LFO RATE, LFO DEPTH, LFO DELAY, CHO SEND LEVEL, REV SEND LEVEL, MFX PARAMETER1, MFX PARAMETER2, AFTERTOUCH |
| Pedal | Pedal Control Assign | Values for Modulation Assign, TAP TEMPO |
| C1 to C3 | C1 to C3 Knob Assign | Values for Modulation Assign, PATCH MODIFY |
| MIDI Group | ||
| Patch Rx Ch | Patch Receive Channel | 1 to 16 |
| Patch Tx Ch | Patch Transmit Channel | 1 to 16, RxCH, OFF |
| Perform Ctrl Ch | Performance Control Channel | 1 to 16, OFF |
| Rx Prog Chg | Receive Program Change Switch | OFF, ON |
| Rx Bank Sel | Receive Bank Select Switch | OFF, ON |
| Rx Sys Exc | Receive System Exclusive Switch | OFF, ON |
| Tx Prog Chg | Transmit Program Change Switch | OFF, ON |
| Tx Bank Sel | Transmit Bank Select Switch | OFF, ON |
| Tx Edit Data | Transmit Edit Data Switch | OFF, ON |
| Tx Active Sens | Transmit Active Sensing Switch | OFF, ON |
| Device ID | Device ID Number | 17 to 32 |
| Soft Thru | Soft Through Switch | OFF, ON |
| PATCH SCALE group | ||
| Type | Patch Scale Tune Type | EQUAL, JUST(maj) in C, JUST(min) in C, ARABIC |
| Tune C to Tune B | Patch Scale Tune C to B | -64 to +63 |