Patch Effects Edit Mode (Rhythm):
Use this mode to edit the Global Effects Settings.
To edit the Effects Parameters, use the < CURSOR > buttons to select the parameter you wish to edit. Then, use the - VALUE + buttons to change the parameter's value.
|
Master Effects Switch (p. 65)
| Parameter |
Description |
Value Range |
| MFX |
Multi-Effects Global Switch |
OFF, ON |
| Cho |
Chorus Effects Global Switch |
OFF, ON |
| Rev |
Reverb Effects Global Switch |
OFF, ON |
Rhythm Effects parameters
| Parameter |
Description |
Value Range |
| Multi-Effects Group |
|
(p. 68) |
| Type |
Multi-Effects Type |
00 THROUGH to 47 FBK RIPPER |
| --- |
Multi-Effects Parameters |
The number of parameters varies depending on the Multi-Effects Type. Refer to "Setting Multi-Effects parameters" (p. 68). |
| Send Lvl to Cho |
Multi-effect send level to chorus |
0 to 127 |
| Send Lvl to Rev |
Multi-effect send level to reverb |
0 to 127 |
| Ctrl 1 |
Multi-Effects Control 1 |
Refer to "Setting Multi-Effects parameters" (p. 68). |
| Ctrl 2 |
Multi-Effects Control 2 |
Refer to "Setting Multi-Effects parameters" (p. 68). |
| Chorus Effects Group |
|
(p. 86) |
| Type |
Chorus type |
CHORUS1, CHORUS2, CHORUS3, CHORUS4, FEEDBACK CHORUS, FLANGER, SHORT DELAY, SHORT DELAY(FB) |
| Pre-LPF |
Chorus pre-low pass filter |
0 to 7 |
| Level |
Chorus Level |
0 to 127 |
| Feedback |
Chorus Feedback Level |
0 to 127 |
| Delay |
Chorus Delay Time |
0 to 127 |
| Rate |
Chorus Rate |
0 to 127 |
| Depth |
Chorus Depth |
0 to 127 |
| Send Lvl to Rev |
Chorus send level to reverb |
0 to 127 |
| Reverb Effects Group |
|
(p. 87) |
| Type |
Reverb Type |
ROOM1, ROOM2, ROOM3, HALL1, HALL2, PLATE, DELAY, PANNING DELAY |
| Character |
Reverb Character |
0 to 7 |
| Pre-LPF |
Reverb pre-low pass filter |
0 to 7 |
| Level |
Reverb Level |
0 to 127 |
| Time |
Reverb Time |
0 to 127 |
| Delay Feedback |
Reverb Delay Feedback |
0 to 127 |
|